Manage All Your fire safety
Through A Fire Equipment

standad feature

  • UL listed and FM Approval-PENDING
  • 2 to 8 loop or 2 to 116 loops versions
  • 400 sub-address pointer per loop
  • 4 programmable NACs; Class B or 2 Class A
  • Multiple internal NAC synchronizations protocols
  • 5.25 A or 10.25 A power supply options
  • 3 programmable inputs and 5 programmable relay outputs
  • 7 inch, full-color resistive touch screen with intuitive user interface
  • Up to 24 programmable soft “function keys”
  • Up to 64 user login accounts
  • Positive Alarm Sequence
  • Pre-Signal
  • Alarm Verification
  • Drift Compensation
  • CO Alarm
  • Hard-wired fire and trouble routing inputs and outputs
  • Modular and expandable electronics
  • Option to “invert” inputs and outputs
  • 5000 programmable cause and affects over 50000 inputs and outputs
  • Can be networked with programmable functionality

Our products

HEAT SENSOR

ATJ-EA

The fixed temperature/rate of rising sensors provide accurate temperature measurement data to the fire alarm control panel. These sensors are well-suited for environments where dust cooking fumes, orotherr factors make the use of smoke sensors impractcal.

SMOKE SENSOR

ALN-V

The photoelectric smoke sensor id suited to detecting optically dense smoke typical of fires involving materials such as soft furnishings, plastic, foam, or other similar materials, which tend to smolder and produce large visible smoke particles

SMOKE & HEAT DETECTOR

ACC-V

The smoke & heat multi criteria sesoris particularly suited for detecting smoke produced by a wide range of combustibles found in various applications. Temperature monitoring is achieved by a thermistor placed for optimum sensitivity.

Interface Modules

DCP-AMS

DCP-AMS-KL

The smoke and head multi Addressablemanual pull stations provide a fast and practical means of manually initiating a fire alarm signal. Bothe single-action and dual-action manual pull stations are availabel.

Repeater Panel

YBN-NSA-4(4")

HSB-NSA-6(6")

SCI-B4 (4″ w/built-in isolator)

SCI-B6(6″ w/built-in isolatory)

The sensor bases are designed specifically for use with the analog sensors. A common mounting base allows sensor interchange and maintains loop continuity when sensors are removed. A simple anti tamper head locking system is provided which is enabled by removing a small plastic tab on the back of the sensor.

Manual Pull Station

The Manual Pull Station is a die-cast pull station used for a variety of applications focusing mainly on fire alarm systems. The pull station is a single action switch. The pull station has a 10-amp snap action switch and a dedicated terminal block for the ease of wire connections

Fire Alarm Devices

A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. These alarms may be activated automatically from smoke detectors, and heat detectors.

Fire alarm control panel

There can be multiple fire alarm control units in a fire alarm system. … When a smoke detector or pull switch in a zone activates, the electrical current to the fire alarm panel changes, and the control panel indicates that a device somewhere in that zone has been activated. we provide world class fire alarm system.

My day  usually fells safe. because i use powerful fire products served by mi2bd company. Only mi2bd supplies the world class products, which is acquired trust from his customers.

Our partners

Translate »